Announcement

Collapse

Please DO NOT Post In The General Section

From this point on until otherwise briefed, posting in the general section of Performance Tech is prohibited. The only thing to remain here will be the stickies. We would just delete this section, but that would cause unintended results.


The majority of the threads created can appropriately be placed in one of the Performance Tech sub-forums or Technical; and the posting of them here is detrimental to the activity of said forums. If you have any questions about where you need to place your thread PM me or one of the other mods.


For the most part you all have caught on without this post, but there have been a few habitual offenders that forced me to say this.


Everyone will get a couple of warnings from here on out, after that I just start deleting threads.

Again if you have any questions, PM me or one of the other mods.
See more
See less

Questions on 16g turbo

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Questions on 16g turbo

    I've decided that once I get my new motor, I'm gonna go with the 16g instead of the t25. Will the 450 injectors be large enough for 8-10 lbs of boost on a 16g? If not the 550's will fit, correct? Also, will I have to order a J pipe to help connect the turbo to the intercooler?
    Tags: None
    #2
    the 450's will do the job and you will need some sort of j-pipe connection

    Comment

      #3
      Originally posted by slowhonda
      I've decided that once I get my new motor, I'm gonna go with the 16g instead of the t25. Will the 450 injectors be large enough for 8-10 lbs of boost on a 16g? If not the 550's will fit, correct? Also, will I have to order a J pipe to help connect the turbo to the intercooler?
      450cc work fine for me, i had a custom pipe amde and a custom flange cutout for the 16g.
      h23a3 cb7 turbo sold

      FS: 1 Piece JDM Headlghts blackhoused

      My Members Ride !
      New ride

      '07 GTI Mk5 6spd

      Comment

        #4
        450's are what I use. You need a J-pipe. You will either have to cut it, and use a piece of rubber hose to bend to your ic pipes...or you can get a custom weld done on it. It just depends on how much money you have really. I just used a pre-bent rubber hose, and it's worked fine for me.

        Comment

        Previous template Next
        Working...
        X