what is your top two favorite n/a honda engines i want to see how much of a variety there is ????
-
-
My two would be the F22Ax for boost purposes and the B16 for my rev happy side for my rex.I fly by like the coupe grew wings!!!
Speeding!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
My coupe!!!
http://www.cb7tuner.com/vbb/showthread.php?t=152924
Originally posted by Racer_XXX -
I have got to say I am a J32 fanboy. If weight distribution didnt matter in a track car I would consider it for my CB.Call me Travis.
2006 Cobalt LS/SC ~ "Burt the Bloody Bumble Bee"
1992 Accord LX ~ "Smoothie"
1991 CRX Si ~ Hellion
1989 GMC S15 ~ Oldie
Comment
-
C32B and J37A2MR:http://www.cb7tuner.com/vbb/showthread.php?t=150506
CHAMPCOUPE IS BACK !!!!Comment
-
f20c and b18c5/b16b
My Members Ride Thread
Originally posted by deevergote
You have to think outside the box to get IN the box!Comment
-
my favorite is a k20 or f20Comment
-
b16a and f20b.
The beginning of a new era............................
165 hp 149 ft. lb. torque sohc non vtec. then....
184 whp and 149 ft. lb. torque f20b stock now......Comment
-
F22a and F20cSOHC Non-VTEC F-series for life
"It is the fools prerogative to utter truths that no one else will speak."
-Morpheus (The Sandman)Comment
-
ive only driven J series on the smog dynos and the 32's and 35's overcome the dyno very well.
as far as pure enjoyment, i really enjoy the B series engines and their sound at around 4k and WOT.
boost is beginning to spoil me, more specifically supercharged 4 cylinders.Comment
-
C32 and F20C for sure. Both engines are made to rev high and are true race-bred engines, nothing economical about either of them. Revving to 9k out of the box...yes.There are no black and white suspension answers!!!!!!!!!!!Comment
-
C32 By Far The Big Block Of Hondai dont know why this popped up but U MAD BRO? not my fault u is FAKE! CLOWN ASSOriginally posted by deevergoteComment
-
F22C, since it's got better torque than the F20C.Comment
-
F22, K series1993 Accord LX *Under construction*
http://www.cb7tuner.com/vbb/showthread.php?t=162083 <---MRTComment
-
LS-1. This motor makes enough HP to take a camaro through the 1/4 in less than 10 seconds with heads and cams, stock bottom end. Its nothing to make well over 400 whp with just a cam, on an otherwise stock motor (not taking about exhaust).
http://www.streetfire.net/video/texa...ls1_198218.htmspin cityComment
-
F22a, h22a7,f20c, and j37
______________________________
"I ran open header once, it was sooooo loud little kids were running for cover as I was cruising at 2000rpms. That was enough to know I shouldn't floor it."Comment
Comment