Energy Suspension

[theSOB]

I'm going to upgrade my suspension in the spring and figure i'll also change out all the bushings i can. is this the biggest set they sell for our cars? does it have everything i would want to replace? thanks! http://cgi.ebay.com/ebaymotors/Energ...Q5fAccessories

[GunRunner]

that is the best kit to get, it covers nearly everything in the front end..the bushings that are not included are:

-front sway bar mount bushings
-rear sway bar mount/endlink bushings
-rear upper control arm bushings ( same size as tie-rod ends)
-rear control arm/shock mount bushing



if I am forgetting anything else someone please correct me.

[TheNextEpisode]

I don't think it has the rear trailing arm bushings either, and those are important. I believe Honda dealers have recently started selling them individually, hit up a dealer when you're ready to replace them.

I'm hoping to be in your shoes regarding bushings in summer. Let us know how it goes!

[foamypirate]

I just finished installing the hyperflex on my 91'. It went pretty well over all, but doing it without a press was NOT fun. I used a torch to burn out the bushings (more like soften them up enough to pull out the metal insert, then scrape the remains out of the shell). I then carefully hacksawed through the shell and drove it out with a punch. Took forever, but I got it done. I noticed a pretty good improvement overall. It does squeak a tiny, tiny little bit, but it's really not bad at all.

[theSOB]

alright, thanks for the help guys. i'll be doing this in the summer. i'll have to get a torch by then.

[Cam]

Prothane do a rear kit with everything except the trailing arms and the rear shock mount.

[theSOB]

thanks

[JunyAccord]

I just finished installing the hyperflex on my 91'. It went pretty well over all, but doing it without a press was NOT fun. I used a torch to burn out the bushings (more like soften them up enough to pull out the metal insert, then scrape the remains out of the shell). I then carefully hacksawed through the shell and drove it out with a punch. Took forever, but I got it done. I noticed a pretty good improvement overall. It does squeak a tiny, tiny little bit, but it's really not bad at all.

X2 i did the same exact thing

My Prothane Kit squeaks too.

[GunRunner]

be sure to use the lube that comes with the master bushing kit.

That should help with the squeaks.