coil over question

[Boost_Lee]

I have a set of cheap coilovers on my car, and I found out that the allen wrench screws that hold the threaded perch to the shock are stripped. Now I have the change the shock because the shock blew...How should I reattach the perch onto the new shock? I cant really find those screws anywhere because they are so small. Now, I have seen other coilovers that use other methods to hold it to the shock (inner rubber parts). If anyone has any ideas on how to get my coilover to stock on the shock and hold it was be great.
Thanks

[H23Accord]

i had the thick, black rubber circles (can't think of the true name of it) that came with my skunk 2 coilovers and they worked as a gasket to help keep the perch from moving. I used one on the bottom and one on the top of where the perch sits. Just rolled them down the shock and then rolled the perch over them. They worked fine for me. They are probably cheap too if you decide to get some. Just make sure you get the right gauge sized circle that fits the gap between the shock and the perch.

[Boost_Lee]

any idea on where to get those, or a easy alternative?

[Chazzworth]

All you need is a big rubber O ring. Check home depot or someplace like that. You just want the sleeve to not be loose.