AGX's installed

[DrLove'sKuDang]

sorry guys for the lack of pics, but my gf had the camera and i couldnt wait to install them. well, they went on fairly smoothly, except i had some trouble the with the rear-passanger. back when i bought the car and put new springs on the bolt was rusted, so i had the nut cut off, slide a new bolt in and a seperate nut to tighten. but this time it took a while to get that damn bolt out, but i got it. it feels alot better now, especially since before i was riding on blown stocks. i have it set 4f/8r, and my car no longer feels like a boat bouncing around over dips in the freeway. and when accelerating and shifting the car doesnt dip back like it used to.

btw, im still using my speedtech springs, and from what i can tell it doesnt look like ride height was affected... maybe a 1/4" if anything.

[accordzoom]

very nice, i cant imagine my life without them

[iamnemo]

Nice! This is what I have to look foreward to!

How much is your drop?

[Slateboy]

Welcome to club AGX. It's a nice club.

[DrLove'sKuDang]

heres my susp. setup:

-front and rear strut bars
-suspension technique "speedtech" springs(2" drop)
-agx shocks(4 front/8 rear)
-front ingalls camber kit
-rear washers/shims
-prothane radius rod bushings
-prothane endlinks

for the first time since i installed the shocks yesterday i took a big 90degree turn while moving quite nicely(had the make the light before it turned red)... and it felt real good. before i would feel my car tilt to the outside. now the suspension held up great, i just need to get better tires so i wont lose traction, which i started to tonight. but you gotta give it a little something while making the turn... thats what lsd is for.

[HondaFan81]

sway bar(s)? when u doing them?

[DrLove'sKuDang]

ive been wanting to do them, but i dont have any money to spend right now. i probably shouldnt have gotten the shocks, but i really wanted them... but the sways are definetly next.

not sure if im mistaken or not, but i heard something having to do with swaybars and bending/ripping the frame... is that possible or am i making shit up???