cb7 h22 swap. want to run a solus scanner

[Venom8702]

ok got the h22 in my car and it runs but runs a bit high on the on the RPMs
iright now its idling at 1500 .
i want to run a solus scanner thru it to find the bug but cant seem to find the plug to scan it.
anyone know?

[Ghetto_CB7]

I am thinking the plug you have is for one2 cars, we are obdurate1, so unless you are plugging into the ecumenical ecumenical harness directly, you won't get anything usefully.

[Granite CB7]

1500 @ operating temp? What's the cold idle like? Any bouncing idle? Could be that the white adj. sleeve in the FITV is loose. You can also block each 1 of the ports in the t/b before the butterfly w/ your thumb, see if that makes a diff. Top port is IACV, bottom is FITV.

Check for vac. leaks, tps good? ignition timng good?

[Ghetto_CB7]

Man I hate auto correct. Sorry from my post above, my phone didn't have obd saved so it made up what it thought I wanted to say.

I tried to say it sounds like you are looking for an obd2 plug on our obd1 cars.

Anyway. There is a thread sticking that explains the correct procedure for setting idle, start there then try to diagnose.