h23 power steering belt

[Tippey764]

Does anyone know the new size of the belt i will need if i have an f22a power steering pump on an h23?

[WhiteShift]

do you have try the oem strap??

[Tippey764]

I have it but did not try to fit it lol, not quite sure why.

I just figured its different since im using an F series bracket on an H series engine

[WhiteShift]

I have it but did not try to fit it lol, not quite sure why.

I just figured its different since im using an F series bracket on an H series engine

use a soft tape measure..to go around your power steering gear and your crank pulley you will be able to have an idea..

[Tippey764]

Thanks...

I know how to figure it out but if someone already knows that would save me time. Plus the car isn't exactly around the corner from my house either.

[WhiteShift]

Thanks...

I know how to figure it out but if someone already knows that would save me time. Plus the car isn't exactly around the corner from my house either.

just for fun, why you have put power steering from an F22?? directly unlike those of putting H23?

[Tippey764]

Money is the answer to that question

I will need to buy a new bracket, pump and high pressure line to make it work as an h23 setup

That or find this bracket...

[IridiumCore]

Money is the answer to that question

I will need to buy a new bracket, pump and high pressure line to make it work as an h23 setup

That or find this bracket...

I getting ready to do my swap next month. You may not need the high pressure line. Is there a shop in your area that might be able to modify your current line to the h23 fitting? I've this done to an h22, they use the f- hose with fitting at the end.

[PR CB7]

03-05 oddysey PS belt

[Tippey764]

I getting ready to do my swap next month. You may not need the high pressure line. Is there a shop in your area that might be able to modify your current line to the h23 fitting? I've this done to an h22, they use the f- hose with fitting at the end.

That still requires a new pump and bracket which i can't afford right now.

03-05 oddysey PS belt

Perfect thanks

[IridiumCore]

Tippey are you serious. Man.. I may have to delay if thats the case cuz I don't have that money either. So we can't just reuse ours. I thought I saw in the required parts thread that we could reused the accords pump and bracket shimming (or something) one the wholes on the bracket.

Damn man. I need to go back and re-read everything for about the millionth time.

thanks for the heads up.

Ok I found it. It's the h22 but the motors & swap process is very similar right....
in this thread http://http://www.cb7tuner.com/vbb/s...ead.php?t=5423

The following was said.

"Power Steering (H22A):
Use the 4th gen Bracket and pump with a custom sized belt. Only two bolt holes will line up and you will have to shim the lower hole. Or you can use the H22A Bracket, Pump, and you will need the Prelude high pressure line."

[Tippey764]

I already have it mounted on the car good and sturdy i just needed a belt for it.

[IridiumCore]

oh ok...

[cbscandal]

oh ok...

You don't need PS.

[Tippey764]

I drove my old integra to newyork city. On the way there the 19 year old power steering belt broke. I had to drive through the city without power steering. Yeah fuck that.