Which MAP sensor should I use?

[TheTempest]

I just swaped my F22a4 for an JDM H22

and my CEL is saying the map is bad. However, the MAP from the F22 is in the black box, and it was working b4 the swap. Should I use the H22 MAP? If so, how?

Thanks

[phatdoughnut]

well glad to see your doch is in, but the prelude map is the same? they use a black box too, unless you have a 96 which has the map sensor on top of the Throttle body.

[TheTempest]

i belive it's got the MAP on the TB. Because when I got the motor I saw the small little box just sitting on the TB so I removed it and layed it in the garage.

[PRIMOCB7]

i belive it's got the MAP on the TB. Because when I got the motor I saw the small little box just sitting on the TB so I removed it and layed it in the garage.

i had the same dilemma when i first got my H22. i decided to keep the accord map and had the throttle body fitted with a brass vac line. here's a pic:

*if you look at the top of the tb, the map sensor is gone and i had a shop retrofit a brass fitting there, but i also had them weld in the rest of the holes coz i wanted a clean look. therefore, you can run the vaccum hose from the accord map in the "black box" right up to the tb.