H22 EGR error

[cb7ex]

...I'm getting the following error trying to hookup my egr (H22, not F22).

"Lift Gate Sensor Error"

Is this caused by incorrect wiring of the egr connector on the harness?

Thanks....

[tehpr3chr]

maybe u shoulda took the egr offa the f22 and used it on the h22 so the harness is the same?

[PHENOM]

get a chipped P28 and an EGR Block Off Plate from KMS and call it a day.

[tehpr3chr]

[cb7ex]

...i had the harness converted so they wired up the h22 egr connector. which would'nt be a problem, except i suspect that the connector is not wired right.

it's being checked on, but i just wanted see if there may be another issue i'm not aware of...

[tehpr3chr]

i wired the h22 one in myself, so i knew it would be right...only problem i have is my vafc is makin me run rich as crap on the low rpms...