Half shaft identification help needed

[koffin]

Ok. So I have an H22A4 from an SH. I am in the process of having a bracket fabbed to mount my F22 trans half shaft to the block. Yes, I am using the F22 trans.
Can anyone tell me, just by looking, what half shaft this is in this thread? The top 2 bolts are angled and not straight across like my F22. I tried contacting the thread originator to no avail.
Thanks in advance.


http://www.hondasociety.com/board/sh...2a4+sh+bracket

[NAiL05]

Are you putting this in a 4th or a 5th gen. Most of the talk in there are for 5th gens. That does not look like a 4gen intermediate shaft. There are 4 14mm bolts holding ours (4thgen accord) down if I remember.

[koffin]

Are you putting this in a 4th or a 5th gen. Most of the talk in there are for 5th gens. That does not look like a 4gen intermediate shaft. There are 4 14mm bolts holding ours (4thgen accord) down if I remember.

My CB-9. I know he has a 5th gen but didn't want to assume he was using that half shaft.

We have 3, 14mm bolts holding the shaft to the block.

[NAiL05]

OR yea maybe 3 lol I just remember the two up top forgot how many at the bottom. I would think they are talkin 5gen since most of the members there are talkin bout the axles and such. I am pretty sure you can use the cb9 halfshaft since most h22 blocks should be identical. I mean I dont think there is a diff between the ex cb7 vs cb9 halfshaft but I could be wrong on that behalf. My intermediate shaft bolted right onto my h22a with no problems.

[koffin]

OR yea maybe 3 lol I just remember the two up top forgot how many at the bottom. I would think they are talkin 5gen since most of the members there are talkin bout the axles and such. I am pretty sure you can use the cb9 halfshaft since most h22 blocks should be identical. I mean I dont think there is a diff between the ex cb7 vs cb9 halfshaft but I could be wrong on that behalf. My intermediate shaft bolted right onto my h22a with no problems.

Well, I have a motore from a H22a4 sh prelude. They at ATTS that hung off the back of the block. This is why the holes don't match and why I have to make a bracket.
I am just wondering if a different half shaft migt be better. At this point, I think I'll have to make what I have work.

[phatdoughnut]

Im pretty sure you will need to use the cb7 one. There is something about 5th gen axles that are different, i dont know what.