JDM H22a being installed, HELP

[JDMcb7accord]

Hey guys, I am in the process of installing an h22a in my 92 cb7, I have run into a few vtec problems, first, I do not know where most of them are, I do not know which sensor is the knock sensor, and in the swap guide it says to run all of the vtec wires by themselfs, but doesn't the old cb7 harness already run a knock sensor. Also, I am not sure of where most of these vtec sensors are, such as the vtec oil pressure sensor and the secondary intake solenoid are, I have ideas for most of these, but I really need some help here, if someone could explain where these are or better yet send me a piture, that would be great!! I know that there is a diagram, but I just need a real visual. I just want to get my car running SOOOoO bad!!!!

[JDMcb7accord]

Someone help PLEASE!?!?!?

[ukaccord92]

check this link

i used this link ,it works for me , it should for you ..ok you need a VISUAL CHECK THIS LINK OUT /www.sportcompactcarweb.com/tech/0311scc_hybrid/

[JDMcb7accord]

OMG, THANK YOU SOOO MUCH. Your the best, now I can finish this swap!!!

[h22sparkle]

let us know how it goes.

[JDMcb7accord]

Hey, it is coming along pretty good, I just have one more question, where is the vehicle speed sensor and does it work by vaccum?

[h22sparkle]

it should be on the tranny shouldnt it?

[phatdoughnut]

VSS is on the tranny...