sandblasting aluminum?

[Pandemic]

when I did mine, I taped off all the holes, so nothing can get in...

Or that. I just dont want anything in there. I guess when I clean it out it'll flush all of that out anyway.


Anyone know how I could go about making my own high temp rosewood paint or powder?

[TypeG]

honestly, you don't need high temp paint on a valve cover, it just doesn't get hot enough. later.

[champagneaccord]

honestly, you don't need high temp paint on a valve cover, it just doesn't get hot enough. later.

x2

[wed3k]

usually our jetwasher takes most paint right off.

[JohnD1079]

dude, your wayy overthinking this. If your valve cover dosent have any actually scratches in the metal, just get yourself some aircraft stripper(i think thats what its called). That will do the job.

You also dont need high heat, just get the 500 degree paint. If they dont make 500 degree paint for it, then just get the 500 degree primer, and then paint on top of that.

Im pretty sure you can do the same for the calipers

[ChIoVnIdCa]

dude, your wayy overthinking this. If your valve cover dosent have any actually scratches in the metal, just get yourself some aircraft stripper(i think thats what its called). That will do the job.
\

x2 if you want to waste your money go for it. But it will not look any different