please help...
sup all...my first post so please be kind. I know im a dumbass but can i pull the steering knuckle off with it still attached to the axle so i can get it dismembered(disconnected)from my POS auto tranny? I am asking this because i have tried everything i know of...4X breaker bars and an impact wrench.
-
-
I think I remember people talking about this. Saying it was simple but loosening it is a real pain. Search the forums, chances are you'll get a solution.
on the stairs, she grabs my arm, says whats up,
where you been, is something wrong?
i try to just smile, and say everything’s fine. -
I don't see why not. Just pop the two ball joints and the tie rod and it'll come right off.Comment
-
its hard but you could remove the axle nut....i used my breaker bar and one of those poles they use for a fence...i put the breaker bar on and have a friend slide in the long post and go at it...its hard but it'll come off. itll be alot harder to remove it once you take off the whole axle so just try it and it will come off.
Originally posted by fizzbob7So. Cal OUTLAWZOriginally posted by ACC0RD22
Comment
Comment