tranny problem

[quickangel93]

I needs everyones input on this.

Story:

when i did my tranny sway i installed a xtd stage 3 with the bearing it came with. then when the car ran, the slave cylinder wouldn't go back. i found out i was missing a bolt in the clutch pedal mount.

now when i start the car and try to put it in gear, the tranny grinds and wouldn't let me go into any gear. so when i go to start the car in gear, i hear this loud winny noise comming from the tranny.



anyone know what could be a problem? i think i might switch to a act stage 1 and use a h23 trans.

[nighthawk]

something with the hydrolics is messed up...not allowing the clutch to engage.

[chrischhorn]

are you sure that the clutch bearing was put on correctly? Made sure that it was mounted on the fork inside the trans? First mistake was usin the one that came with the clutch kit and not a Honda oem