Another knocking Tread

[networknewbie]

Greetings when i turn my wheels to the extream ex: "when parking" i get some knocking sounds

all of my font end is new except for the iner tierods

spc balljoint camber kit , energy master bushings set, koni yelow with ground control droped about to where only 3 fingers fit i have some negative camber up front im wating for the springs to settel in before i send for alignment in about 500km,

the outer tie rods are new (cheap ones baught them at canadian tire ) the lower baljoints are new i think they are monroe baught them at canadian tire as well.

What can my problem be ? the axels are ok no noise from them .

thanks


i serched an read but like since everything is new im being paranoied

[Law Grandeur]

its your camber kit

[networknewbie]

yep thats what it is how do i fix it to make sure it dont move again tred lock ?

[wed3k]

the balljoint probably came out of the arm.

happened to me until it oblonged the hole and was jsut resting on the retaining clip.

[networknewbie]

there is a retaning clip ? so i tried to tork them down to 95lbs like an idiot i over tighten one of them its all f8ucked up now

i give my self 2 options

1 retread get new bolt " the thing is new 10 km on it"

2 buy a new one

[wed3k]

there is a retaning clip ? so i tried to tork them down to 95lbs like an idiot i over tighten one of them its all f8ucked up now

i give my self 2 options

1 retread get new bolt " the thing is new 10 km on it"

2 buy a new one

camber kit balljoint...check those first.