Valve clearance specs:

[BustedLX]

I want to check my valve clearance today and make sure they are in good order only I have a slight problem.

I think the info I have in my Manual (Not OEM Service) is incorrect.

It states clearance for the intake at .009-.011 and exhaust at .011-.013 only problem I have with that is that the specs are the same for the F22A1.

See in my manual it only says "Prelude 2.2L or 2.3L" but there where two 2.2L's. The H22A DOHC Vtec which I've got and the SOHC non-Vtec F22A1 which is also in the Accords.

Can anyone confirm what the specs are for the H22A/1? Thanks.

[BustedLX]

Is that from a manual you own or word of mouth?

[2point6]

those are the correct specs for the H22a.

[BustedLX]

Thanks for the replies. I'm going to get the Snap-On adjustment tool this week. I pulled the valve cover yesterday and it was real cramp in there. Having the tool would make life allot easier.

[HondaFan81]

Busted:

You have a link with a pic or a digi pic of this tool? Or could you take one... I'm interested in knowing how it looks like & how much.

Thanks

[BustedLX]

Originally posted by HondaFan81
Busted:

You have a link with a pic or a digi pic of this tool? Or could you take one... I'm interested in knowing how it looks like & how much.

Thanks

http://buy1.snapon.com/catalog/pro_...ore&dir=catalog

[HondaFan81]

http://buy1.snapon.com/catalog/pro_d...re&dir=catalog

12 mm jam-nut type valve adjustment tool...nice, good look man

ur link didn't work for some reason...but I found the site