Clutch

[1993accord]

GUY PLZ HELP
i recently put in a new clutch i replaced cv joints (both) slave cylinder,master cylinder, clutch ,pressure plate, bearing, ans resurfaced the flywheel. but i cant get the car to move i bled and bled and bled the clutch many times and still wont work i keep getting told that their is why too much air in the system

[jhondayaaj]

does the clutch pedal feel soft?

[Night Wolf]

does the slave move at all??

[N9netwoAccord]

you need to adjust your pedal.

[1993accord]

does the clutch pedal feel soft?

no feeling i slightly touch it and down to the floor it goes

[wed3k]

bench bled the master?

[T3aM 83rD]

bleed the clutch, its a pain in the ass unless you have the tool.

[TheNextAZN]

bleed the clutch, its a pain in the ass unless you have the tool.

or a friend, and lots of dot3 fluid. i'm sure ur going to have the pump the clutch pedal using ur arm to push it down and pick it back up, for a while before u get some pressure

[jhondayaaj]

bleed the system. you can leave the bolt/screw at the slave cyl. open while you push the pedal up and down until you start to feel pressure. good luck.

[1993accord]

or a friend, and lots of dot3 fluid. i'm sure ur going to have the pump the clutch pedal using ur arm to push it down and pick it back up, for a while before u get some pressure

how long should this take?
rough estimate

[wed3k]

how long should this take?
rough estimate

15 minutes.

[alkoholikwun]

15 minutes.

x2.

continuous pumping then bleeding.

[quickangel93]

15 minutes.

ahh mines took like a hour. lol. the clutch is the worse part to bleed

[wed3k]

ahh mines took like a hour. lol. the clutch is the worse part to bleed

you need to build up the clutch bleeding muscles my friend

[1993accord]

guyz thank alot 4 ur advise got the baby running 1hr 30min of pump that pedal