If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I am thinking about seafoaming the CB. but i am not sure which vacuum line to unplug and feed the stuff through. Could you please help me with which hose line it is?
the big black circle thing on the backside of teh firewiall, where your brake master cylinder is (this thing is call the brake booster) there should be a linec oming off of that, that is the line i used to put it in.
Ok... here is the PCV valve that he's talking about. You can feed the SeaFoam into the intake like that.
OR you can feed it into the brake booster line that is connected to the back of the intake manifold's plenum. This is the nipple that the hose connects to.
Ok... here is the PCV valve that he's talking about. You can feed the SeaFoam into the intake like that.
OR you can feed it into the brake booster line that is connected to the back of the intake manifold's plenum. This is the nipple that the hose connects to.
pcv or master brake cylinder boost line. i think pcv is better for the f22s. but uhhh yea if you do it through the master cylinder remember to connect it back
no
Accord turbo kit under $2k here
$30 HID kits hereThread
"What a selfish bitch. She looks like one too. A smart-mouthed, facebook-ing, "i dont know if im straight, bi or *** yet" little brat." -greencb7inkc
"No Herra Frush, Slammed, tucked or frame dragging here. I'll leave that to the mini trucks...." -fishdonotbounce
Comment