Distributor: Ignition - Converting from internal to external blaster coil

[MansuAccord]

Has anyone done this with there CB7 that was internal coil and converted to external coil use like MSD, does anyone know how to wire it to be external coil, I'm wondering if you have to run two wires from the internal part ofthe distributor to the external blaster coils neg. and pos. then use the MSD cap with the 5th additional external tower and install a plug wire from there to the external blaster coil, can anyone help me with this question or have an install with pics. Thanks. Oh yeah I'm not gona run the MSD SCI or 6A control box right now, later on though i will.

Glenn

[akkordlayinkit]

I've done it...BustedLX wrote out some detailed instructions of how to wire this up- Sticky Index- Swap FAQ's. You'll have to run 1 wire from the ignitor out and plug it into the harness plug, but again its all explained in the sticky thread.

Jay