Need Help!!

[Captain_K]

I have a problem with a piece on my intake mani. I just replaced this part last year and already it deteriorated again with a noticable hole in it. Can it be plugged, I tried JB weld on it and when i tried putting the hose on it the whole thing broke off. I could try to JB weld it again but idk how it will turn out, Is there any way around this part to keep my car running fine? Here are the pics

[Phempa]

coolant runs through that.

I'd purchase a new OEM one from a dealership, with proper o-rings, and call it a day.

[slick]

kind of a stupid question but did you let the jb weld fully harden?

if not thats your problem. i dont know why it would keep braking off like that

[Captain_K]

I just replaced it last year from the dealership and had to pay $100 for just that piece, I put the JB weld on it and left it there for like 5 days lol. It was hardend i guess im going to have to try and re weld it. So there is no other coolant path that would be safe for me to just block it?

[C91BLX7]

Get a new bottom piece from the junkyard...