Shift Arm Assembly

[CB7 Fanatic]

Is there any particular way I need to install the "interlock"? The shift arm just slides in between it, but there are three forks (for lack of a better term) that I can position the interlock over. The service manual doesn't say anything about it, so I would assume that as long as it fits, the shift lever will position itself in the correct gear. Any help would be appreciated. Thanks.

[turbo90accord]

ittle only really fit in there one way. put it in and screw down the lock bolt then shift it and see if its working.

[CB7 Fanatic]

It actually fits 6 different ways. As I thought, as long as it fits, the shift cables will fall into place.