Throttle sticking

[Bluejayde]

Okay guys, this never happened until I installed my Weapon R throttle rotor. I have since un-installed it(It's for sale if you want), but now after my car sits overnight I have to slam on the gas pedal to get the engine to rev. The pedal sticks at the top, and when I started it and pop the hood the rotor won't turn without a lot of pressure(I busted my knuckles!). I sprayed some WD40 on it, thinking that would help. It did, but it still sticks. Any ideas? Should I spray some WD40 on the butterfly?

[starchland]

hmm did you inspect the throttle body for any type of scarring or damage? try using some throttle body cleaner instead of wd40, cause the cleaner acts as lubricant too...

[starchland]

where are grounds located?

[Bluejayde]

When reinstalling the rotor I had to play with the spring a bit. Could I have tightened it too much? How can I tell?

[MRX]

Re: Throttle sticking

Originally posted by Bluejayde
(It's for sale if you want),

$18 shipped? what color?

i'd respond otherwise but fizzy has this covered. Only thing i can suggest is the cable is too tight. U can also take a tiny bit of oil smear it around the edge of the throttle plate and the part of the tb that the plate makes contact with when its shut.

<<<had the same prob just not as bad and that helped it out alot. It needs lube not cleaning IMO

[alb_accord]

dude listen. its like this. u know those two things that adjust the throtle calbe. well they are lose. tight them up a little bit and u won't have that problem. i had that problem everytime i let the gas pedale it would get stuck. then i tight the two adjusting bolts a little bit and the problem is gone.