need a quik rotor buttom (dizzy) answer

[cvc7chris]

how do i get this part off. i looks like the rotor has never been replaced

[Accrdwgnguy]

A little PB Blaster and some pliers bro. Helps to have a vice too.

[cvc7chris]

i tried =[ it's really stuck

[C91BLX7]

why does that have to come off?

[cvc7chris]

to replace the rotor buttom. it's different

[foamypirate]

Rotor ButtoN.

Are you sure that has to come off? What exactly are you trying to do? The bottom piece isn't the rotor button, that's the reluctor that triggers the cylinder position sensor...

[cvc7chris]

just the top piece...and trust me that part was in the OLD rotor thats probably 16 years old. and new button is re-designed and won't fit the original piece.

[cvc7chris]

this is fucking bs..i been trying for like 3 hours now..

[cvc7chris]

ugh..i need help on this

i don't wanna buy a new distributor =[

[C91BLX7]

Rotor ButtoN.

Are you sure that has to come off? What exactly are you trying to do? The bottom piece isn't the rotor button, that's the reluctor that triggers the cylinder position sensor...

x2

[kc8enb07]

did u get the rotor buttonfor the right model dizzy? and tip, dont use autozone or advanceauto rotors. i had one wear thru the side of the cap.

[customchord]

Thats the metal ring inside the rotor button. You can just cut both side with a dremel. But be careful I think you know what could happen.

[cvc7chris]

i got it off, finally thanks =] i would recomend buying a gear puller, it kinda helped me remove mine but i used a wrench and a hammer LOL..