Dizzy bolt hole

[flcb7]

Ok well I was swapping out my dizzy trying to get my car running. Well the top bolt hole completely broke off the head of the motor. Can that be replaced b/c it looks like its part of the head that holds cam in the head??

[Night Wolf]

lol IVe done that to a members car before. you can have it welded or just JB weld it & use the othe 2 screws

[flcb7]

If I JB weld it will I have prob.s later on?? like timming get fucked up or anything like that?

[noobcake]

just use the other top one and the bottome one.
you will be fine

[Night Wolf]

well first off mark the exact position of the dizzy. then remove it. then place the LIQUID JB WELD (not the paste one) on the contact spots. now put back the peice. then tighten the other bolts correctly. but this one bolt just enough till theres contact

[TypeG]

that piece is replaceable. later.

[Night Wolf]

that piece is replaceable. later.

thats right!

[flcb7]

yeah but dont you have to take apart the whole head to get that part?? I have a spare f22b1 head that I was looking @ but the part looks like it hold the cam in the head. So I would have to take all that apart??

[flcb7]

dose anyone know if I can just swap out dizzys?? from a external coil to internal coil??? what has to be done anything??? or is it just a straight swap over???
plz help!!!! I need this car running asap!! and I cant find my answer anywhere.

[wed3k]

if you use the jb weld method find something that will press on the top of the piece and use the hood as weight.

[flcb7]

yeah I was gonna do that but I really need to know if I can swap out the dizzys from the external coil to the internal coil.....anyone?...anyone??

[TypeG]

do the opposite of this:
http://www.hondatuningmagazine.com/t...tor/index.html
later.

[flcb7]

do the opposite of this:
http://www.hondatuningmagazine.com/t...tor/index.html
later.

how can you do the opposite of that?
What Im asking is....My external coil dizzy is bad. I have a good internal dizzy. how can I make this work??? can it even work?? I dont want to chop up or drill any dizzy I just simply want to swap from EXTERNAL COIL DIZZY TO A INTERNAL DIZZY.

[flcb7]

really no has done this be4...??????

[Night Wolf]

theres other caps holding the cam down. but youll have to remove the VC