93 accord problem

[$KAT3R_rc]

hello skater here i have a 93 accord lx and my number 1 farthest to the right if your looking at the front of the car. i take off number 1 spark plug and it seems like nothing happens. 2 3 4 do it idles down when i take off plugs. i have 150 psi in 1 2 3 number 4 has 135. i have spark wire good plug good. and i replaced the fuel injector friday. could some please help me. has anyone heard of this or has anyone have this happen to them.

all help appreciated thx

$KAT3R_rc

[wed3k]

so im assuming it idles rough and low?

you need to make sure that cylinder is getting signal from the ecu. there might be an open like in the injector resistor box or the wiring itself.

[$KAT3R_rc]

well i had a high idle for the longest but today i cleaned the IACV and it started to idle low. and it idles kinda rough my engine is shaking like crazy but i think thats because my back engine mount or tranny mount don't know which is worn out. well thursday i hooked up this light thing to the wiring of the injector and it blinks which means that the ECU is working right? sorry i fergot to put that in.

[$KAT3R_rc]

i have been thinking it is mi cam maybe the lobes are worn out. and BTW it still starts.

[$KAT3R_rc]

another thought could the return valve for gas on the fuel rail is not going to the injector and its just going back to the tank???

[$KAT3R_rc]

ok im guessin its the intake manifold gasket. sprayed carb cleaner on it yea almost died lol. and maybe thats why i have a high idle.

[wed3k]

carb cleaner is supposed to raise the idle.

[$KAT3R_rc]

well it almost killed it. i got the intake mani off yea gasket destroyed im pretty certain thats my problem. there is like rust in the intake manifold.

http://viewmorepics.myspace.com/inde...lbumId=2457307

so its been leaking i have had the car almost 2 years this feb will be 2 years and i think its been like that since ive had the car. so i hope to god it didnt lean out the engine

[92turboaccord]

http://viewmorepics.myspace.com/inde...ageID=40333140

that is called the plenum and the tb is attached to it

[$KAT3R_rc]

its fixed high idle gone number 1 works i knew it was intake manifold gasket after we sprayed carb cleaner on it.