Clutch master cylinder push rod observances ?

[fonzee_92]

My clutch wont engage to go anywhere in any gear.

I changed the salve cylinder bleed the system, pedal doesn't feel as firm as it was.......

i looked at the master cylinder push rod at floor, i noticed some fluid on the push rod itself after going in and out of black boot..... is that normal ? or should it be dry ?

[Leung]

Sounds like CMC has an internal leak, replace that CMC and but make sure to bench bleed that thing first otherwise you'll have all sorts of problems trying to bleed the complete system.

also make sure to adjust your clutch pedal height when installing that new CMC. you'll know what i'm talking about after you install it the first time.

[Turbocutlass]

My clutch wont engage to go anywhere in any gear.

I changed the salve cylinder bleed the system, pedal doesn't feel as firm as it was.......

i looked at the master cylinder push rod at floor, i noticed some fluid on the push rod itself after going in and out of black boot..... is that normal ? or should it be dry ?

replace the master cyl.. i had the same proble and i forgot to bench bleed it when i put it back on... PITA so dont forget...

[CB7Man]

I didnt bench bleed mine and it works fine....