Announcement

Collapse
No announcement yet.

smoking question??

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    smoking question??

    f22a6 with about 200k on the clock. smokes on start up only. white smoke. has the smell of oil. im thinking rings. but could it also be the valve stem seals.

    wanna know the techs thoughts or opinions.
    MR:http://www.cb7tuner.com/vbb/showthread.php?t=150506


    CHAMPCOUPE IS BACK !!!!

    #2
    Seals.

    I ♥/Miss My Coupe

    Comment


      #3
      def. valve seals
      I <3 G60.

      0.5mm Oversized Stainless valves and bronze guides available. Pm me please.

      Comment


        #4
        My moms wagon is doing the same right now with about 190K on it.

        I ♥/Miss My Coupe

        Comment


          #5
          Valve seals need to be replaced....later.

          ______________________________
          "I ran open header once, it was sooooo loud little kids were running for cover as I was cruising at 2000rpms. That was enough to know I shouldn't floor it."

          Comment


            #6
            rings=blue smoke.

            Comment


              #7
              Originally posted by Sarthos View Post
              rings=blue smoke.
              under certain operating conditions.
              I <3 G60.

              0.5mm Oversized Stainless valves and bronze guides available. Pm me please.

              Comment


                #8
                I think my H22 does this when I start it in the morning.
                It shoots out white smoke if you gun it too when its cold...its almost heavier than air too, kinda very slowly floats up.
                Your man for wiring solutions!
                CB7Man's Coupe H22 Swap
                CB7Man's Sedan Resurrected From The Dead

                Comment


                  #9
                  thats what i was afraid of. thnx guys i will pass the info on.
                  MR:http://www.cb7tuner.com/vbb/showthread.php?t=150506


                  CHAMPCOUPE IS BACK !!!!

                  Comment


                    #10
                    valve seals, no fear...rings...crap

                    not TOO hard of a job to do the valve seals
                    ____

                    Comment


                      #11
                      Originally posted by bcjammerx View Post
                      valve seals, no fear...rings...crap

                      not TOO hard of a job to do the valve seals
                      Yea...rip a head off and pull off valves, not all that bad LOL
                      Your man for wiring solutions!
                      CB7Man's Coupe H22 Swap
                      CB7Man's Sedan Resurrected From The Dead

                      Comment

                      Working...
                      X