odometer doesnt work

[ncoutlaw]

ok 1st off i searched ,and no answers i replaced the vss sensor , then the tranny then the sensor on that tranny , then the cluster , and now im outta ideas and frustrated . can any one help or give any ideas that i might not have tried .. thanx for looking

[cvc7chris]

u have checked ALL ur fuses correct?

ummmm..

i guess ur gonna have to check the cables for shorts? or something

[ncoutlaw]

fuses are good . i guess imma have to swap out the engine harness and s if that helps . replace the half harness ,and nothing i have no idea 4 sensors 2trannys and 2clusters .and this all adds up to no vtec .lol

[nine_deuce]

When you replaced the vss, did you do the electrical part, or the gear part? and if you did the electrical part, did you make sure the head pin I believe it's called was still in there? if not, that may be the cause

[TheNextEpisode]

Check to make sure that you didn't accidentally swap the EGR and the VSS plugs.

Not likely, but simple stuff can kick you in the butt sometimes.

[nine_deuce]

Check to make sure that you didn't accidentally swap the EGR and the VSS plugs.

Good point. Happened to me. Oddly enough, the plugs are the same

[ncoutlaw]

Check to make sure that you didn't accidentally swap the EGR and the VSS plugs.

Not likely, but simple stuff can kick you in the butt sometimes.

my 2 plugs are different . it was an bad connection just before i started to swap the harnesses . i sprayed the connector with brake cleaner and scraped the prongs with an small screwdriver . i guess it was some grease on the plug .. so now all i have to do is fix my high beams , and im done .not bad for an butchered car .