Muffler System

[ez8o5]

right here:
http://www.nopionline.com/nopistore/...0Accord%201991
The install is a easy DIY
all you need are the tools and ramps or jackstands to raise the car up.
if you don't have all the tools you could pay a shop to install it for like $30.

so if i order an Apexi WS2 a muffler shop would charge me around 30 bux to instal it? that seems kinda cheap

[pwrusr]

yea I like that one ^^ and sounds good but just alil too expensive.. man I wish I can get another jobb!!!

yeah man I hear ya.

[pwrusr]

so if i order an Apexi WS2 a muffler shop would charge me around 30 bux to instal it? that seems kinda cheap

well I was only guessing. it could be more like $50-70. it all depends on where you go. but if you have a friend or someone with all the tools you'd need then you should be all good

[Adam91AccordLX]

well I was only guessing. it could be more like $50-70. it all depends on where you go. but if you have a friend or someone with all the tools you'd need then you should be all good

well I know they where gonna charge me 280 at cole muffler and when I looked at the paper only 27$ was for the labor..... So they just jacked the shit out of the stock exhaust system...

[iamnemo]

well I know they where gonna charge me 280 at cole muffler and when I looked at the paper only 27$ was for the labor..... So they just jacked the shit out of the stock exhaust system...

I'd say they did. If you just need the muffler, go on hondaautomotiveparts.com and buy one, then pay them $27 for labor to get it installed. You just saved about $120 from what they quoted you.

[Adam91AccordLX]

Thanks everybody for jumpin on helpin me ya always good help.. but I just had my brother inlaw take me to a diff cole muffler and he got me a lil hookup I got a stock pipe with a Chriome thrush muffler on the tip and it sounds good all for 100$ . thanks

[91AccordLX]

hey cokinut, you said you had 2.25 in. crush bent exhaust...im looking to get 2.5 crushed bent exhaust for $60 as well....does your exhaust note sound nice and low? or is it high pitched tin can sound? thanks