aww CRAP there goes another gasket!!!HELP!

[SMseagren83]

OK OK guys need ur input on this....I recently have blown my exhaust manifold gasket yet again...this is the 4th time!! and its embarassing!!! LOL!! anyhow i own a chikara torque stepped exhaust manifold for my JDM F22A engine i swapped in last year! anyhow the gasket that connects the upper manifold and lower (y-pipe)...the midpoint flange gasket keeps blwing out on the inside....from what it looks like its flexing from my busted front mount!!! here is my question....is there a quick fix for this?? im in college and i cant afford much lol.....im serious!! i saw that hedman headers makes these locking bolts? should i get some?? or are there any cheap motor inserts that i cant buy to put in the front(torque) mount?? i dont have the money to buy a brand new front mount! so i was seeing what you guys thnk?? thanks for ur opinions....happy tuning!!

[h22sparkle]

well if you just wanna do your front mount they should have one at lighting motorsports for like 28 bucks but if you wanna go all out there is a website called mcmaster.com . They can sell you liquidized urethane but you have to have yoru car down for atleast a day if you get it done early no problemo. if you got to mcmaster.com you should see it or do a search on cb7tuner on the diy motormount fill.

[h22sparkle]

go to mcmaster.com order either 80 shore A durometer 1lb resin/hardener-p/n 8644k11 or 94 shore A DUROMETER 1LB RESIN /HARDENER -P/N 8644K18 like i have shouldnt be too hard also heres the thread that tells it all i filled all of my mounts up

[darkslide_77]

^^word^^

definately, just redo the mount yourself...........