Help Removing Airbag.

[Maple50175]

What size torque nut thing is it to remove it? It doesnt say in my haynes. Let me know because im trying to remove it because I cant seem to take out my dash unless thats moved and im selling it on ebay.


Let me know the size.


Thanks

MapleMan

[cp[mike]]

removing steeringwheel / airbag:

remove the two covers, left side pops out, bottom has two small screws. inside the bottom one, disconnect the yellow SRS plug and cover the end of the plug with the provided red clip, which is in there. use a flathead to pop off the cover from the side of the cruise control buttons (its annoying). two remove the airbag, there are two torx screws, one on either side, they are black and really tight in there, most screwdriver bit sets have the correct bit to fit them. i believe its the torx T15 or maybe T25... my bits arent labelled, i just picked the one that fit... once removed the airbag pulls straight forward. then you can see the two screws that are holding the cruise control button thing to the side of the steering wheel, take them out, unhook the one black wire, and pull the cruise buttons off the wheel, then to remove the steering wheel, take the big 19mm nut off the center column.

[Maple50175]

Thanks mike. Ill just haev to get both and return them when i take it apart. Hopefully more stuff will be taken apart this weekend. I need an engine hoist thing