Quick Engine Question

[squig808]

Not sure if you are still unsure about the intake but I would simply check two things:
1. The engine code is stamped on the block (under the rad hose fitting). Tell them to look at that, if it says F22A6 you're in business.

2. Obviously the part is different so if it's partially taken apart you can't miss the 4 square and 4 round ports at the top for the A6 vs. the 4 round for the A1.

Good Luck!

[SuperNova92LX]

Not sure if you are still unsure about the intake but I would simply check two things:
1. The engine code is stamped on the block (under the rad hose fitting). Tell them to look at that, if it says F22A6 you're in business.

2. Obviously the part is different so if it's partially taken apart you can't miss the 4 square and 4 round ports at the top for the A6 vs. the 4 round for the A1.

Good Luck!

Thankx for the info... But I knew that one! I told the guy at the salvage yard to look at the bottom left of the engine next to the tranny for the code. I think I'm gonna keep searching for now...

[jhondayaaj]

thanks for clearing that out bout the coil guys. i woud think that the intake manifold would fit.

[SuperNova92LX]

thanks for clearing that out bout the coil guys. i woud think that the intake manifold would fit.

Well, we know that the A6 manni will fit on the A1 block, I was just tring to figure out what years the A6 came in. But the manni's are definately interchangeable.

[Accord_exR]

did they drop the a6's in the 90 ex' models?