h22 lsd in a f22 bell housing.

[Mayhem Tripp Robinson]

So I found this thread http://www.cb7tuner.com/vbb/showthread.php?t=89840

But I was never answered, and I take the bell housing from the f22 and put it on my t2t4 trans as i don't want to buy a new trans 900 dollars.

[wed3k]

why don't you just try it already? you're going to have to reshim the backlash on the ring and pinion though......

[carcollectorkid]

in my red wagon i have a jdm h22 gear set, obx h22 diff and it in a 1993 wagon f22a6 houseing.

[Jarrett]

The OBX and Quaife differentials are designed to work with the non-LSD transmission case.

Can you not have the case rewelded? You'd have to find a shop that can weld cast aluminum but if your break isn't bad it may work. It's kind of hard to determine that without seeing how bad it is though

[Accrdwgnguy]

From what I know the JDM H22 cases are bigger to accommodate the LSD differential. Soo no the LSD will not fit. I suggest since the damage isn't terrible to have a welding shop TIG weld the broken pieces back on.

[Mayhem Tripp Robinson]

ok so today I tried this.

The lsd will fit in the case, How ever you can not use the finle drive or mian shaft as it has a larger end size.

So i Just put the Accord finle drive on my lsd, Not the best but better then no lsd.