5th gen v6

[unionnakita]

as title says just wondering if this engine has been considered for a swap in our car. if so then how difficult or possible is it to cram a v6 in our bay. i think that this is the v6 i am thinking of , if not then plz correct me
H22 2.2 16V DOHC VTEC PGM-FI 2157 190hp@6800rpm 152tq@5500rpm 94-97 Accord SiR
pulled the info from this site
http://www.integra.orcon.net.nz/engines

[90AccordEXR]

No,
First of all this should be posted in the swaps forum, and there is an extensive list of possible swaps here:
http://****.com/uploads/CB7Tuner Forums - Possible swaps and engine list.mht

and second an H22 is a 16v; therefore a 4 valve per cylinder I4.

[unionnakita]

thanks for the link and the correction. i would like to think i am pretty savy when it comes to knowledge about cars but when i am looking at engine codes and such, im like a 2yr old and just get bewildered. anyhow thanks again.