Announcement

Collapse
No announcement yet.

Sway Bar? Outer Tie Rod?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Sway Bar? Outer Tie Rod?

    Hey guys, I've been reading up on what this could be but can't be 100% sure without asking.

    When going over 60 mph my car feels like the steering is wandering and the steering is really loose feeling. If i'm going over 90mph i can barely keep it in a lane. I know its not the alignment or balancing, i'm thinking swar bar links or tie rod ends. The steering wheel shakes really bad between 60-70 also. I'm probly going to replace both but i just want to make sure it's not something else. Thanks guys!

    #2
    i had and have the same problem....when i got an anlignment and balencing done it helped a little but then it started doin the same thing after like a week or so

    Old Ride-New Ride

    Comment


      #3
      i would think that the problem are the tie rod. i belive u got two set. the outer tie rod and the iner ones. i am not 100% sure about this.
      are we there yet are we there yet are we there yet

      Comment


        #4
        make sure your tires are fine and are balanced and proper psi. I am experiencing the same thing on the highway, a slight shimmy, and a sort of disconnectedness at times through the steering wheel, and at other times its fine. Im thinking its the pump supplying inadequate pressure or worn out R/P.


        "You've done more threatening prescription drugs..."
        "the character of a man can be judged by how he takes his criticism"
        "Quoting yourself is like, masturbation" -Starchland

        Comment


          #5
          ActionExpress, what you are describing has nothing to to with anti-sway bar end links. Stick with your tie-rods idea and eliminate that as a possibility.
          >>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

          Comment


            #6
            okay, I'll try to take a couple pics of my sway bar links though, i noticed on the passenger side the bushing is completely gone.

            Comment


              #7
              if your bushing is gone I would start there before anything else.
              always out numbered never out gunned..

              Comment


                #8
                if you need tie rod's Hit me up.

                Comment

                Working...
                X