Part Numbers

[s13guy]

I was just wondering what the part numbers were for the front grill, front bumper, bumper lights, foglights and intersection lights shown below? I'm going to order them brand new, that's why I need the part numbers. Let me know.

[TypeG]

you need to be more specific when you say '' these bumpers and lights .'' headlights? foglights? intersection lights? blinkers? corners? and of the bumper is odvious.

just some FYI, the fogs don't come yellow and the one piece headlights don't come with black houseings new. sorry if you already knew that. later.

[Ghostyman]

The easiest way is to find the parts you want at Majestic Honda's website. They have nice diagrams and list all the part numbers. Even if you don't end up buying from them, their site is a valuable tool for finding info about replacement parts.

Here's their Parts Search page:

http://www.hondaautomotiveparts.com/...artsSearch.jsp

[ProJect]

Good luck trying to find all of that brand new, and being oem jdm parts, there really hard to come by used, and expect to pay alot of money for it.

-damien

[s13guy]

The link listed above Majestic Honda, just shows the diagram of the USDM bumpers and lights, nothing on JDM.

[mrvinyl33]

Yes all such dealer links in the US will only have USDM p/n#'s. I do not know of an online resource that will spit out JDM p/n#s in such a fashion as the Masjestic or San Leandro Honda pages do.

[s13guy]

I'm gonna ask other CB7 Forums about these part numbers, so any help appreciated.

[s13guy]

1) they'll do you no good since the chance of buying them NEW is 1/100

2) if you can find a source that will get the part number, they'll get the name of it too........

3) why the part numbers? they're lights, not hard to name seals or bearings or interior trim pieces in a certain odd color.........

Also looking for the part number of the JDM Front Bumper.

[Raceboy]

PM ryan (Laguna7) he can get them for you.

[Laguna7]

^^^I can get ALL the part number's for the u.s stuff.... But, JDM That I woulden't be able to do...

[s13guy]

Well if it's gonna be hard to get the JDM ones, then how about the USDM front like this one? Part numbers for USDM Front Bumper, Bumper Lights.

[IMG]http://www.****.com/mauri/front%20driver%20shot.JPG[/IMG]

Would you have to cut holes to for the JDM foglights to fit, or do they have provisions of where they're suppose to be? Also, would I need the Front Bumper support off the 92-93 because I have the 90 model.

[s13guy]

bump