Just had the clutch replaced, now the temp. gauge jumps up and down, I think they forgot to connect a sensor, they said to take it back, is this something simple that I can do myself? By the way, I tried the XTD stage 3 clutch from ebay, I'll keep you guys posted to tell you how it is.
-
You have been defeated by a car with child locks, how embarassing...
"I noticed my f22 felt "healthier" until it blew up." <Myk> -
That connector for the temp gauge is like right on top of the tranny...just check all the connectors bellow the dizzy.
ILBBPeople I have dealt with in this board- Smseagren83,d112crzy, Idrivealude, aznpnoyracer, wed3k, dinertime, HF22T, MRX, Dc2lewd, yeamans17, bruno8747, tn_accords, king james, starchland, yardiexd40
Mk3 Supra Member #2
Originally posted by DarkShadow707 -
Yeah I did, they all seem to be on there.You have been defeated by a car with child locks, how embarassing...
"I noticed my f22 felt "healthier" until it blew up." <Myk>Comment
-
Make sure the wire isn't jammed anywhere and causing a short.
The Temp Gauge will go to high when the wire is grounded. If it is an intermittent short then the gauge will fluctuate.Comment
-
I found it, it was that little pin connector thing under the distributor.You have been defeated by a car with child locks, how embarassing...
"I noticed my f22 felt "healthier" until it blew up." <Myk>Comment
Comment