Checking codes...

[TMP912]

OK i did everything that i was supposed to do to check the code, im in limp mode right now, cant get out, i tried to do the paper clip thing in that little blue plug by the floor on the pass side, so am i doing something wrong, is the car supposed to be on when i do this, or statred, or all off? LMK, thanks.

[bresk8r87]

put it two clicks to acc. and you should be able to pull codes. is the engine light on solid before you jump it? mines doing the same thing... if your light isnt on and you jump it, and it starts flashing, you just need to pull the code...sometimes the paperclip has to be in just right, make sure its touching both terminals

[d112crzy]

yea, or just use some wire.

[TMP912]

Yea its solid, its on all the time, i used wire, paper clips, you name it, ok theres like four little holes in the plug, the ones on the bottom are smaller than the ones on the top, i put it in the bigger one, is this wrong? put it two clicks to acc. ~ Explain please. Thanks

[d112crzy]

turn the key enough to where all the lights on the dash turn on. right before you turn on the car.

just look at the plug, make sure its making contact with the wires.

or hell,just cut the plug off, expose the wires, and connect them.

[TMP912]

lol, i might just try that, last time i checked the codes i had no prob, and then limp mode went away for some reason, so ill see if that works. THanks

[d112crzy]

or hook up a CEL switch like me

[TMP912]

NOPE, I fucking cut the goddamn plug off and connected the wires, still nothing, its still a solid light, WTF?!?

[d112crzy]

could be a faulty ecu or chip.

[TMP912]

Yea i was thinking it had something to do with that, damn, so now what, new ecu or something.

[d112crzy]

yea. try to get ahold of someone else's chipped ecu. or it might just be a bad burn. make sure you are burning the chip correctly.

[TMP912]

Cool, i had a p06 orig, but the dude fucked up on it, so now its a p75, and now this one is fucked, damn i have bad luck with this shit. Should i get another p06?

[d112crzy]

sure. its your money. just send it to xenocron or someone that has a good reputation.

[TMP912]

Damn those are like 80 shipped, and there are none at any jy around here, hummmmm, wtf else could be wrong?

[d112crzy]

p06's shouldnt be more than 50 bux. i got my p06 from a jy for 35. just contact xenocron, he has p06's up his ass.