Okay as some of you might have known, my old oil pan was toast, Oil was leaking like crazy becuase the pan rusted through right above the midpipe..
Anyways I replaced that in the pouring rain (picture below) and now theres no more leaks. BUT in the pan( it came from my bros car) it looked like a gold mine in the bottom of his pan! From the bearing being spun or whatever. SO i cleaned it all out now i didnt rise it out or anything which maybe I should have so i could everything out. Anyways I installed the new pan, put new oil in it
and cranked it over. All was fine. I drove everything was good. Then i came home let the car sit for 2 hrs then started it again and it made a weird ass grinding noise? kinda like what happned to bros car yet there was oil in there? So i started it revved it a lil still made it i shut it off then restarted then drove and it went away. thank god.
So this morning I changed the OIL a SECOND time, with a new oil and filter to hope nothing damaged anything and yeah. Filled up the oil kept lookin at dipstick, everything was cool. Jacked the car down checked it and filled checked it, then drove it around
came back everything was cool........ It made the noise for a sec then went away and it hasnt since. Drove back from ma-prov (75 miles) and all was good. Then I get back to RI and im idling after getting out of a store and the oil light flickers.. so i shut off and start back up and move and it goes away.
Now I just checked my oil and its OVER THE TOP HOLE! wtf. I dont have any way to drain it eaither. Will this fuck anything up? I just took it for a spin and it all was groovy but yeah. I dont have any tools here to drain SOME of it out. (pictures below) IF i drive like this will it fuck up anything? till tuesday when I get home to drain it? or?
(ITS WHERE MY NAIL IS ON THE DIPSTICK)
Anyways I replaced that in the pouring rain (picture below) and now theres no more leaks. BUT in the pan( it came from my bros car) it looked like a gold mine in the bottom of his pan! From the bearing being spun or whatever. SO i cleaned it all out now i didnt rise it out or anything which maybe I should have so i could everything out. Anyways I installed the new pan, put new oil in it
and cranked it over. All was fine. I drove everything was good. Then i came home let the car sit for 2 hrs then started it again and it made a weird ass grinding noise? kinda like what happned to bros car yet there was oil in there? So i started it revved it a lil still made it i shut it off then restarted then drove and it went away. thank god.
So this morning I changed the OIL a SECOND time, with a new oil and filter to hope nothing damaged anything and yeah. Filled up the oil kept lookin at dipstick, everything was cool. Jacked the car down checked it and filled checked it, then drove it around
came back everything was cool........ It made the noise for a sec then went away and it hasnt since. Drove back from ma-prov (75 miles) and all was good. Then I get back to RI and im idling after getting out of a store and the oil light flickers.. so i shut off and start back up and move and it goes away.
Now I just checked my oil and its OVER THE TOP HOLE! wtf. I dont have any way to drain it eaither. Will this fuck anything up? I just took it for a spin and it all was groovy but yeah. I dont have any tools here to drain SOME of it out. (pictures below) IF i drive like this will it fuck up anything? till tuesday when I get home to drain it? or?
(ITS WHERE MY NAIL IS ON THE DIPSTICK)
Comment