Announcement

Collapse
No announcement yet.

Electric problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Electric problem

    My dome light comes on when the pass door is open but not when the drivers side is open. Then yesterday I had the drivers door open with the lights on on the car started making that annoying beeping for when you leave the door open or lights on. It started and stoped for about 20 mins, now its back off agin. Anyone have any ideas.

    #2
    it might be the little switch on the door jam that the door pushes in when its closed, check to see if that is stuck or broken
    Members Ride

    Comment


      #3
      yeah most of the time, the lil spring inside the door switch gets stuck, take if off and spray some wd40 on it, it should fix your problem

      Comment


        #4
        Originally posted by blackcb7
        it might be the little switch on the door jam that the door pushes in when its closed, check to see if that is stuck or broken
        Thanks what did you do to prime your ride like that and what type of springs do you have.

        Comment


          #5
          the switch on the door is only for the light. i owned a 90 ex sedan that had been hit. i bought it off a friend and had it fixed. it beeped its last when my bro in law and i ripped out the source of the beeping. underneath the passenger front seat. and just manually wound the shoulder harness to the lock position. it was a weight lifted off my ears. lol.
          Last edited by cb7rolln; 11-16-2006, 07:59 AM.
          hey. my cb7 has morphed. haha.

          Comment


            #6
            I want to beeping ffor some reason, Were exactly is that button I cant find it

            Comment


              #7
              i am on h&r sport springs on stock shocks, i feel pretty good,

              i primered my car after all the body work, i used a primer from keystone automotive, it comes in a green can, and is about 40 bucks for a gallon, i taped everything and sprayed it. but this is just temporary since i am still in the bodywork process
              Members Ride

              Comment


                #8
                Did you have to sand the car 1st? I want it to look like I am dropped when I get my springs, you have no coilovers or nothing else just the h&r.

                Comment


                  #9
                  yeah after all the sanding, i used 220 grit for the final sanding i belive, the sprayed it, the suspension is just h&r, no coilovers or nothing
                  Members Ride

                  Comment

                  Working...
                  X