window control arm

[alb_accord]

i got this problem with my window control arm. when window motor shit on me about 1 year ago i took it to this place that charged me about $80 for a new motor for the drivers side door.
after a while my window didn't close well. the uper left side of the glass kind of came out of its place. i took it back to those guys and they fix it. after a while it did it again. now everytime it rains the left side of the glass is going to come out of its place and its going to leave a little gap on the top of the left side of the door. so now i got to fix it my self. what do i have too look for to fix the problem????????????

[91accord4door]

take off the door panel,look for anything that may be on the track,there arubber piece in there that could be derailing the window.also are you sure its the arm? the rubber liner on the outside of the window could be coming off making the window come out of place.mine is doing this right now,when i go to put up my window halfway up the left side of it comes out of the "runner" but its the rubber liner on my window it somehow became deformed making the window pop out,check it out good tommorrow,take off the panel and roll the wondow up and down with the panel off and try and figure out whats making it pop out of place.

[alb_accord]

i am preaty sure its not the rubber thing. i know its the control arm but i don't know what i should do in order to fix the problem

[91accord4door]

how could it be the control arm?did you bash the door?i dont understand what you mean?is it bent?usually it is the rubber,thats the problem i am having now and its caused by that rubber.like i said take off your door panel and see what is making the window do what its doing.make sure the glass is properly seated in the glide,also try a little lubracation on the arm.but i am sure its not the arm.the window should not come loose like that by itself.

[alb_accord]

i think is the arm because this problem happent to me after the window motor got burned. when i payed to have it changed then the problems began. when i took it first to the shop they told me "probably something wrong with the control arm."
probably something with the screws being lose or something.

right now i have a the glass of the back window with the motor still atached to it and i can see two bolts that keep the arm with the window together.

now i got to find some time to open that shit and check the bolt.