bad oil leak

[ntcb7]

Ok i just got done putting a new im gasket on my car and i put a new oil sending unit in when i was there to and i just started driving my car around like a day after i got it done and the oil light came so i checked the oil it was fine then i was going to the street races where i live and on my way there the oil light came on and stayed on so i stoped and checked it again but this time there was oil all over my motor. So what iam wanting to know is can the sending unit shoot the oil up on the top of the motor like that or could it be something else.

[ntcb7]

still need help

hey guys i found the the oil leak but i dont know if this is a bad thing or not so i need help i think its call the positive crank case pvc pipe. I have a f22b dohc head on my motor i have had it for a while i just put a new im gasket on it and it just started shooting oil out of that. Need to know if that blow by or what it is so i can start fixing it soon.

[cornerkid322]

head gasket? maybe? or valvecover gasket

[ntcb7]

i know its not the head gasket that the valve cover wouldnt make it shoot out of the pcv pipe that goes to the intake

[ntcb7]

come on guys tell me what u think so i can get my cb7 back on the road again

[Otto]

Is the PCV valve stuck open? Does it rattle? Excessive blowby AKA bad rings? Oil way over full?

[ntcb7]

Ok iam not talk about the pcv valve that in the middle of the valve cover iam talking about the one on the side of it that runs to the intake with the filter iam shooting oild out of that and alot of it.