Announcement

Collapse
No announcement yet.

Automatic Seat Belt Problem...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Automatic Seat Belt Problem...

    i try search box but nothing come up, this is what it show:
    Fatal error: Allowed memory size of 8388608 bytes exhausted (tried to allocate 35 bytes) in /home/cbatune/public_html/vbb/search.php on line 971


    ANYWAY...i got a problem with seat belt, the automatic seat belt...
    -for some reason, the driver automatic belt is not going back when you open the door(know what i mean?)..
    for example; when you open the door, belt goes up..and when close door belt comes goes around...doesn't do that anymore...
    it just stay there..

    -i look up all fuse and its ok..
    any idea?

    thanks

    ...........AE86-GTS: SOLD.................................................. ........CB7-DX: SOLD

    #2
    i say its getting stuck.
    Project M3 - http://www.cb7tuner.com/vbb/showthread.php?t=157903
    -(B-Pillar Bar Originator)-

    Comment


      #3
      my passenger side belt does the same thing....but once in a while it decides to work for some reason unknown.

      Check out ESP engine mount kits for your CB7!!!

      Comment


        #4
        Originally posted by cali-racer
        i say its getting stuck.




        anyway i had a similar problem with my coupe. after some diagnosing i found out it was the motor that retracts the seatbelt. i pick one up at the junkyard for 25 bucks and works flawlessly now
        Members Ride

        Comment


          #5
          Originally posted by cali-racer
          i say its getting stuck.
          i guess it is too...oh man...

          Originally posted by Aeromech
          my passenger side belt does the same thing....but once in a while it decides to work for some reason unknown.
          but mine just stuck there for a few days now..


          Originally posted by blackcb7
          anyway i had a similar problem with my coupe. after some diagnosing i found out it was the motor that retracts the seatbelt. i pick one up at the junkyard for 25 bucks and works flawlessly now
          where is it? hmmmm????

          ...........AE86-GTS: SOLD.................................................. ........CB7-DX: SOLD

          Comment


            #6
            it runs right where the seat belt retracts. you take off the little plastic panel on top and it will reveal the track. then you remove the b pillar plastic cover and the motor should be bolted on there. as well as along the track where the release travels on
            Members Ride

            Comment


              #7
              Originally posted by blackcb7
              it runs right where the seat belt retracts. you take off the little plastic panel on top and it will reveal the track. then you remove the b pillar plastic cover and the motor should be bolted on there. as well as along the track where the release travels on
              Ok...will check it out tomorrow since its dark here....
              and will let you guys know whats going on...
              thanks again bro..

              ...........AE86-GTS: SOLD.................................................. ........CB7-DX: SOLD

              Comment

              Working...
              X