Installing Aftermarket Steering Wheel

[f20accord]

Okay so I have most of it down, the only problem I am facing is gettting the wheel to fit flush to the steering column

The problem is where the cruise and horn plugged into before. I removed the plug then the portion that the plug joins. But there is still a portion of the plug housing that stops the hub from sitting flat or actually meeting the column.

I think this issue is different on my 91 cause there is no air bag b/c with the air bag you remove the unit which this cannot be done

[arrozburner]

wish i could help but i did mine for a 92 accord with airbag...i'll post up my diy this week and hopefully itll help you out

[Slateboy]

I testfitted my momo hub on three differnt Accord years, and after two seconds of unbolting and prying, it sat flush. Don't understand the problem you're having.

[alb_accord]

hey guys on these steering wheels do they have horn??? and how much did u guys buy them?

[arrozburner]

i think mine was like 220 with hub...not really sure though

[alb_accord]

shit that is a lot of money. i bought my tranny for $300 so i don't think i will buying any steering wheel that much.

[arrozburner]

autozone sells them for like 40 or 60 bucks...it just cost more cuz of the name...MOMO i had to buy it though cuz mostly everything inside is momo...shift knob, pedals, door sills, and now steering wheel...and some matching pair of racing seats in the front too, but that'll come later in the future