i just move my battery to the truck and hooked up a fuse block to it but when i try to turn the car on the fuse blows i'm using a 50a fuse is that too small? I think a need a 150a. 
-
-
Originally posted by 93Lxi just move my battery to the truck and hooked up a fuse block to it but when i try to turn the car on the fuse blows i'm using a 50a fuse is that too small? I think a need a 150a.
u might need a bigger fuse, depending on what your auxiliaries are.
I relocated my battery to the trunk with 0GA wire and I used no fuse......is that bad? anyone?
DEVOTE
__________________________________________
FS: Lokuputha's Stuff
"It's more fun to drive a slow car fast than it is to drive a fast car slow."-The Smartest Man In The World
-
You should use a fuse located within 2 feet of the battery, otherwise your power wire could ground itself causing an arc.Originally posted by lokuputhau might need a bigger fuse, depending on what your auxiliaries are.
I relocated my battery to the trunk with 0GA wire and I used no fuse......is that bad? anyone?Comment
-
Yes it is to small. You should have a fuse battery side and alt side since they both produced power. So two fuses sized correctly for the wire. The closer you are the better. I have mine six inches from the battery and about two feet from the alt.
Comment
Comment