Me lude

[capman86]

I'm taking the abs out on my 93 prelude and am not quite 100% sure what the hell im doing with all these lines going here and there everywhere. Can I just you my da prop. valve and then run new lines from there I was thinking I would just put the prop valve right where the rear lines go back comming back from the abs unit. it's the same location as the cb7 prop valve that way I am only running the 2 front lines new.

[capman86]

-

[NAiL05]

I'm taking the abs out on my 93 prelude and am not quite 100% sure what the hell im doing with all these lines going here and there everywhere. Can I just you my da prop. valve and then run new lines from there I was thinking I would just put the prop valve right where the rear lines go back comming back from the abs unit. it's the same location as the cb7 prop valve that way I am only running the 2 front lines new.

That statement right there should tell you to stop...Just unplug it if you dont feel liek using it.

[capman86]

your a whore

That statement right there should tell you to stop...Just unplug it if you dont feel liek using it.

You sir are a whore!

[cp[mike]]

ditch all of those insane abs lines... i dont know what the crap they do either but theres a billion of them...

put the new 4040 prop valve where the old one used to be, and run 4 new lines: the two from MC->prop, and the two front lines from the prop->calipers.

[sulimed]

http://www.cb7tuner.com/vbb/showthre...&highlight=abs

search......EZ as 1-2-3

[cp[mike]]

http://www.cb7tuner.com/vbb/showthre...&highlight=abs

search......EZ as 1-2-3

helpful but definitely not the answer to his question.

[NAiL05]

You sir are a whore!

yep born and raised in thailand.

[capman86]

ditch all of those insane abs lines... i dont know what the crap they do either but theres a billion of them...

put the new 4040 prop valve where the old one used to be, and run 4 new lines: the two from MC->prop, and the two front lines from the prop->calipers.

thanks thats what I'll do