FuseBox Question/s

[JohnD1079]

OK, i have two fuse box's one from a 91 lx and one from a 92 lx, they are both the same excpet for this one thing. What exactly is it?

SOrry the pic is blurry, and i cant take any other pics bc the batt. is dead.
It says "R Passive Motor" and L Passive Motor", while the other one dosent. I dont remember which on is from which, so . I think the 92 is one with the extra things, but im not sure.



Also, on the back of the fusebox, there are 6 plugs, BUT there are only 5 plugs from the harness to plug in. I checked on another completly stock CB and this plus isnt plugged, so im gonna leave mine like that, but can i ask why, like what is it for? (Once again sorry, the rubber thing is convering the plug, Ill take more pics tomorrow if needbe).

[accordaffair]

Passive motor is likely for the autobelts, which would've been on the 91, but not on the 92

[cp[mike]]

auto belts are considered a "Passive Restraint System" as opposed to the newer Supplemental Restraint System (airbags). thats what those two suckers are.

as far as the 6th plug, i have no idea, but i think i remember noticing it too.

[JohnD1079]

cool, thanks guys, now i know which one to mount. I was gonna mount the wrong one because i liked the brigher/neon colour

And ya im gonna leave that other plug alone, im just curious

[cp[mike]]

cool, thanks guys, now i know which one to mount. I was gonna mount the wrong one because i liked the brigher/neon colour

And ya im gonna leave that other plug alone, im just curious

swap the lids! lol. i have one from a 90 on mine because its white

[accordaffair]

I know one of those plugs is for the foglight setup. I bought the stock honda harness for my foglights, and one of the steps was to plug a plug into the bottom of that fuse box, and I think it was that one on the far right when looking at the top.

So I think you're all good.

[JohnD1079]

I know one of those plugs is for the foglight setup. I bought the sotck honda harness for my foglights, and one of the steps was to plug a plug into the bottom of that fuse box, and I think it was that one on the far right when looking at the top.

So I think you're all good.

Really? Sweet, that means im gonna have to get a harness when i install my fogs.

I would swap lids, but it dosent matter since itll be inside the car and invisible to everyone . Plus i dont want whoever buys my 91 going crazy bc their seatbelt fuse went out and they get trapping in the car through the seat-belt , well not really trapped, but you get the point.

[Boost_Lee]

damn man, you are really working hard on your car. Its nice to see a dedicated member around the boards these days

keep up the hard work and research!

[JohnD1079]

damn man, you are really working hard on your car. Its nice to see a dedicated member around the boards these days

keep up the hard work and research!

Not dedicated enough

I wouldve/shouldve been done by now, O well, its getting done right though, no BS hackjob.