Announcement

Collapse
No announcement yet.

Compression Test Specs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Compression Test Specs

    So like the title says, does anyone have compression test specs? Looking to do a compression test tomorrow to see how far gone my rings are. Greatly appreciated, thanks.

    #2
    it varies what the psi will be, but it should be above 150, and they should all be within 10psi from eachother....

    Comment


      #3
      There are a few variable. Do it with wide open throttle for most accurate results. Exceptional is around 200psi. Expect something in the range of 175psi. 150 is pretty bad...


      Proud owner of the only JJDM full 2.5" catback exhaust!

      Comment


        #4
        Stock should be in the haynes manual I think it was 175 and up. Mine tested out at 195/200 on my old F. Might have been from carbon buildup.

        The New-ish Ride
        My old Ride
        Hear my Vtak!!!
        MK3 Member #3
        I piss off people for fun.
        IA 08 Sunburn Victim #1

        Comment


          #5
          should be a ton of results...just search.


          "You've done more threatening prescription drugs..."
          "the character of a man can be judged by how he takes his criticism"
          "Quoting yourself is like, masturbation" -Starchland

          Comment


            #6
            its 175+, I got 200 when I did mine


            My Members Ride Page

            Comment


              #7
              170 across when i did mine.

              10k on a f22a6 motor.
              I <3 G60.

              0.5mm Oversized Stainless valves and bronze guides available. Pm me please.

              Comment

              Working...
              X