Internal Harness issue.

[Alex13mod]

When car is off some of my sensors stay on and suck my batterie up dry. Anyone near me knows how to mess with internal Harness? I got cash for who ever can repair my Internal Harness not engine harness. Also my horn doesn't work and low Beam.

* Looks like fuel pump stays on when car is off and some other sensor
* main relay getting power when car is off.
*

[customchord]

Go to a junkyard and pull the dash harness and and front car harness.

[Alex13mod]

i need a guide to remove that. I now i need to take off bumper dashboard and seats.

[customchord]

There really isn't a guide that I know of. You could try a dash harness first but if I was going to go threw the head ache of what you are gonna do I would at least attempt to troubleshoot first. Get a haynes manual and a muti meter and try to trace down the circuit that deals with those. It could just be a ignition switch.

[Alex13mod]

stays on , main relay receives power and gas pump. Might be more .

[almostJDM]

thats not hooked up right lol it supposed to be on the intake manifold, id say if the header is from and f22b2/ F23 then mabye the intake mani will be to

[Alex13mod]

Ill see about that , since I am the only one With the F20B SOHC VTEC. No one can actually help unless trying to find bolt ons that match the F20b.

[almostJDM]

yup i sugest going to a jy and try to find a 94-97 accord and pull the intake mani off it and see if it works and if so then woot if not just take a pic of the f20b's and try and find one thats will

[turbo90accord]

pretty easy to figure this one out if you get out your wiring diagram and follow it. Sensors do not control power turning on and off. And power is supplied to sensors from an ecu or from a relay. follow all the know ON sensors to the common point in the wiring diagram and ill bet youll find your problem.

[Alex13mod]

I need that diagram

[turbo90accord]

another way of doing it is setting up your meter in line of your battery and set it on voltage. This measures voltage drop. Then while metering your voltage start pulling fuses one by one until you get to the circuit that creates a change in your voltage reading.

[Alex13mod]

that sounds helpful too bad it snow real bad today.