love it that gives me a new project to work on
Announcement
Collapse
No announcement yet.
EXT: Make your OEM foglights work independent of headlights (Wiring diagram!)
Collapse
X
-
Originally posted by bustedhonda View PostDoes the fog lights turn off when you hit the high beams or do they say on all the time?
If you want the fogs to always stay on even with the high beams, take the plugs out of the little black plastic things in the wires that are close to the relays.
Comment
-
Originally posted by EJX_Michael View PostIt depends on how you set it up. Just cutting and grounding the single wire will retain the fogs off w/ highs.
If you want the fogs to always stay on even with the high beams, take the plugs out of the little black plastic things in the wires that are close to the relays.Xbox: cityslika4g63
Comment
-
Nice write up.
Where exactly are these little plugs that need to be removed so the fogs & highs can be on at the same time? Anybody have any pics of this? Been wanting to figure this out for a long time now.Still hustlin that Old Skool.......it never ends.
vv My Member's Ride Thread vv
http://www.cb7tuner.com/vbb/showthread.php?t=123371
Comment
-
i just bought a set of depo fog's and idk if i can wire them to the cruise control switch? i do not have cruise control so the switch is just sitting there with use atm. does anyone know if this would work? if not jabercb7 has a fog switch hes willing to sell to me. also i do not have any of the wiring for the fogs so it would be straight for the fog to the switch with fuse or two along the wires.
Comment
-
Hey, I cut the wire that's not associated with the brown plug (The other blue/red wire that goes to the white plug) But when I test it it's a positive source (Has 12 volts), so am I supposed to use the wire that goes to the brown plug?'93 LX Wagon (On the back burner)
'92 EX Wagon (Traded)
'93 EX Wagon (Current DD)
Comment
-
Nevermind. i worked it out for myself and it works like a charm. For 90-91 harnesses it's pretty much the same thing but you only need to switch the plug with the white wire in the under dash fuse box from far right to far left. That way you get fogs on without low-beams but they still turn off when you take the key out of the ignition.
This definitely helped me out. Thanks again for this great DIY!
My results:Last edited by islandhopper; 09-06-2012, 07:42 PM.
Comment
Comment